Consultation & Design Direction
Before we begin
Every project begins with an in-depth design consultation. We explore your vision, preferred aesthetics, material options, and spatial context. Colour palettes, vein directions, finish types, and design concepts are all established here — so every decision is intentional.
We review reference images, discuss your lifestyle requirements, and provide material samples. This stage shapes every decision that follows.
Surface Inspection & Assessment
Day 1
We conduct a thorough inspection of the existing substrate. Moisture readings, adhesion tests, and structural integrity checks are performed to ensure the surface is suitable for resin application. Any issues are identified and scoped before work begins.
A surface assessment report is provided, detailing prep requirements and any additional works needed before application.
Grinding, Crack Repair & Levelling
Day 1–2 (varies)
The substrate is mechanically ground and profiled to remove any coatings, contaminants, and surface imperfections. Cracks, voids, and low spots are filled and levelled to create a pristine, flat base. The quality of this stage directly determines the quality of the final result.
Timing for this stage depends entirely on the condition of the existing surface. Heavily damaged or previously coated surfaces require more time and preparation.
Primer Application
12–24 hours cure
A specialist penetrating primer is applied to the prepared substrate. This critical layer seals the surface, enhances adhesion, and prevents moisture transmission from below. The primer must be fully cured before any subsequent layers are applied.
Primer cure time is typically 12–24 hours depending on ambient temperature and humidity. Skipping or rushing this stage compromises the entire system.
Base Coat
Same day as primer cure
The colour base coat establishes the foundational tone of the design. This layer determines the overall depth and richness of the final surface, and must be applied with precision and consistency. Multiple layers may be applied depending on the design intent.
Base coat colour is selected and mixed to match your approved design concept. This is the foundation upon which the artistic work is created.
Artistic Resin & Marble Effect Creation
Usually same day
This is where artistry meets material science. Our craftsmen hand-apply the artistic resin layers — creating veining, metallic movement, marble-like depth, and visual texture. This stage is unique on every project and cannot be replicated exactly, making every surface truly one-of-a-kind.
Working time is limited, requiring speed and precision. Multiple pours, blending techniques, and vein creation are executed within the working window of the resin system.
Protective Topcoat
After artistic coat cure
A premium polyurethane or polyaspartic topcoat is applied to seal and protect the artistic layers beneath. This layer delivers the final sheen — whether ultra-gloss mirror finish or refined satin — and provides long-term resistance to abrasion, chemicals, UV, and daily wear.
We offer multiple topcoat finishes: ultra-gloss, satin, and matte. Slip-resistant additives are available for wet areas and commercial applications.
Curing, Inspection & Handover
24h walk-on · 48h light use · Full cure: several days
The completed surface is allowed to cure fully. We conduct a final quality inspection before handover, ensuring every detail meets our exacting standards. Full aftercare instructions are provided, along with our quality guarantee.
Walk-on time is approximately 24 hours. Light furniture and normal use can typically resume within 48 hours. Full mechanical cure — maximum hardness and chemical resistance — is reached over several days depending on temperature and the specific system used.